These days, building the solar system is not too difficult a task as long as you have access to some detailed instructions about the best and most comfortable, where you can always find online. With the help of necessary tools and a little 'skill on my part, you too can own your solar system!
This may sound complicated, but the truth is, in reality it is not! All you need is your basic carpentry tools. Maybe they already have at home,and if they are not readily available at all stores. You need a drill, saw, glue, a soldering iron, knife, etc.
Conditions for your project DIY solar panel
The question of importance, of course, solar cells, without which you can not just make a solar panel. You need cells to see how much power you want to buy produce. Be careful when buying solar panels and make sure they are not defective in any way.And 'better if you get your cells from cards, which will only make things easier for you.
Another important requirement is a container large enough that it can easily contain solar cells. The most preferred and suggested material to use for this container of wood, is safe and can be easily done at home, especially for the solar panel.
Inside the container, you need to build a hook for attaching the solar panels. They are easy to find direction on howdo so through different sites of DIY solar panel. Apart from that, you need to build a cover for the container and to protect the solar cells. It is recommended to create this cover of a transparent material such as Plexiglas or something similar. Then you need to puncture the container with some holes through which the wiring is in transit.
Now, here's a tip for fixing the cells within the container: Use silicon seal. But there are some things thatYou must remember that the seal on the demand for silicon. Apply a generous amount of it on the center of the cell, but never at the corners of the cell. This is because there is always a possibility of expansion in the wood, which can easily damage the solar cells.
And that's all there is to it! When you are done with the panels, try to see whether correct or not. Now why do you need a voltmeter, which is again, easy for everyoneDrugstores. All you have to do is the solar panel in an area where you can spot exposed to direct sunlight. Connect the voltmeter to the plate and wait until you see a reading of 18-20 volts. If the reading appears, you can celebrate the success of your project DIY solar panel!
To make for more information, ideas, techniques, and complete picture of your solar house project easy to Earth Energy by Michael Harvey to give it a try!
